Coolbe: The information about the product is provided by the seller. Notwithstanding any of this information, the product is not intended for diagnosis, cure, mitigation, treatment or prevention of any disease, is not a drug or a medical device, and should not be used for any medical purposes. Please consult a medical specialist.
-----
🍀PACKAGE LIST:
- 1 x Oximeter
- 1 x Lanyard
- 1 x EVA Box
- 1 x English user manual
TIPS: (without battery)
🍀FEATURES:
✔OLED display: Dual Color OLED display. Better shows the data.
✔ Multi-direction display: Rotatable multidirectional display. 4 directions, 6 modes, allow you to view your results in any direction.
✔ Alarm function: Set the alarm and beep according to your needs. There will be a warning once the measured values go beyond the setting. Know it immediately.
✔ Long battery life:
1) Low-power consumption, continuously work for 6 hours.
2) In the absence of signal, the product will be in after 8 seconds to enter standby state.
🍀OPERATION INSTRUCTIONS:
1. Install 2 AAA batteries into battery cassette before covering its cover.
2. Plug one finger into rubber hole of the Oximeter (it is best to plug the finger thoroughly) before releasing the clamp with the nail upwards.
3. Press button on the front panel; (Note: if equipped with automatic startup function refers to clamp oximeter, need not press the button, the instrument has 5s automatic signal detection function, directly inserted into the finger, instrument is automatically switched on timely)
4. Don't tremble your finger when the Oximeter is working. Your body is not recommended on moving status.
5. Press the button on the front panel, if we want change display direction;
6. Read relevant datum from display screen.
7. The instrument has the function of sleep, no signal will enter standby state of sleep.
8. Please replace new batteries when OLED indicates the batteries are in low power.
😉TIPS: When plugging your finger into the Oximeter, your nail surface must be upward.
Declaration: Please use the medical alcohol to clean the rubber before each test and clean the tested finger with alcohol before and after the test.（The rubber inside of the Oximeter adopts medical rubber, which has no toxin, no harm, and brings no side effect such as allergy to the our skin).
